Mechanix S2EC-03-011 Knit Gloves: 2XL (11), ANSI Cut Level A7, Palm, Dipped, HPPE (18 ga), Smooth, 1 PR 53MG19 Manual Number of Required Thermals

Manual Number of Required Thermals Not Applicable Minimum Operating Temperature -13 Degrees F Phase Three IP Rating IP20 Relay Style IEC Auxiliary Contact Form 1NO/1NC Includes Thermal Units Not Applicable Overload Protection Type Electronic

Paving Repair Compound Rapidly Starts to Harden Immediately Full Cure Time 1 min Application Mortars and Patching Cements Minimum Application Temperature 0 Degrees F Maximum Application Temperature 105 Degrees F Flash Point 250 Degrees F Product Form Solid VOC Content 0 g/L Functional Cure Not Specified Form Solid VOC 0 g/L Performance Temp

Outside Diameter 3/8 in

75 in Die Code 297 Peep Hole No Lug Compression Connector Type Two-Hole Lug Compression Connector Hole Center to End 0

5402-000000

Mechanix S2EC-03-011 Knit Gloves: 2XL (11), ANSI Cut Level A7, Palm, Dipped, HPPE (18 ga), Smooth, 1 PR 53MG19 Manual Number of Required ThermalsKnit Gloves, ANSI ISEA Cut Level A7, Hem Style Finished, Glove Style Knit, Knit Material HPPE, ANSI ISEA Abrasion Level 4, Hand Protection Style Glove, ANSI ISEA Needlestick Level Palm Not Available, Heat Resistant Glove Type Seamless Knit, Additional Hazard Protection None, EN 388 Rating 4X42F, Standards ANSI ISEA, CE Standards, Insulated No, Palm Type Coated, Glove Coating Cover Palm, Impact Protection Style Low Profile, Glove Hand Style Left and